Cuta Copter is the waterproof fishing drone pioneer and invests huge resources and time trying to perfect perfection. With over 5 years’ experience building the toughest fishing drones on the planet – you can rest assured your Drone fishing has never been so safe, reliable and fun.
The EX-1 has the pilot and people safety at the centre of its’ design. How the EX-1 flies and regulates the pilot is an essential element in assisting with the overall protection of the asset. Platform reliability and stability is paramount, and this has been achieved by using advanced software enabling multiple safety features and multiple hardware redundancies such as dual gyroscopes and dual accelerometers.
The 6S variant features powerful 40A ‘ESC’ Electronic speed controllers, a 6S battery and 13″ Carbon fiber propellers enabling this bad boy to carry up to 2.5 kg
NB: the higher the weight and wind level will massively reduce battery life.
Performance Flight Controller and GPS – The EX-1 features the Pixhawk 4 mini, one of the most advanced flight controllers on the market. The Pixhawk 4 mini features a 32-bit ARM® Cortex® M7, 216 MHz Processor with 2mb flash memory and 512kb RAM. Breaking that down into layman’s terms – It Rocks. The shear speed data is processed results in supreme flight stability, and this is especially noticeable when carrying baits in high winds. In addition to the onboard magnetometer and barometer, it has not one, but two gyroscopes, two accelerometers and two compasses – Feel assured of ultra-reliability as redundancy is built in.
SkyDroid T10 10ch Radio – This high-quality radio is fitted with sand covers over the gimbals to improve the overall weather resistance. Flush mounted buttons and low-profile toggle switches have been used to prevent damage. The 2 x 18650 lithium batteries provide greater than 20 hours radio time on full charge. The T10 has a maximum transmission distance of 1500m – the ‘Geofence’ distance set at factory is 500metres.
App control – The Android APP allows special flight conditions like phone control of landing and take-off, Waypoint missions and follow-me modes. The APP enables drone parameters to be changed wirelessly – (For advanced users)
Water Proofing – In total there are 3 air chambers. Main electronics chamber, Battery bay and camera pod. Each chamber has a water-tight seal. For additional protection, the Electronic Speed Controllers are sealed in Di-Electric resin.
Double flotation– The 3 air chambers provide level 1 flotation. The EX-1 is also filled with laser cut foam buoyancy providing level 2 of flotation. The landing feet also provide additional floats.
Quick Switch – The installed quick switch limits the need to open the battery bay between bait drops, the craft is quickly switched on and off using the supplied switch.
Backpack – Cuta Copter comes with a backpack carry case making it easy to carry hands free.
Real Time Digital Video Stream – The EX-1 is equipped with a HD 720p digital reef spotting camera which has a real time video transmission up to 1000 metres. Camera settings like brightness, contrast and saturation can all be adjusted via the APP and recordings of bait drops can also be made and saved to your mobile or tablet.
Robust Design – Cuta Copter has always prided itself on being and building the toughest drones on the market, and the new EX-1 takes it a step further with even greater survivability.
Waterproof Electronic Bait Release – The bait release mechanism is fully waterproof.
GPS – The New advanced PIXHAWK 4 GPS enables concurrent reception of up to 3 Global Navigation Satellite Systems ‘GNSS’ not just two such as GPS and GLONASS it deals with GPS, Galileo, GLONASS and BeiDouh – in layman’s terms – It Rocks! The GPS has as also been located to the highest point of the craft for the best satellite reception and maximum separation from other electronic parts in the craft to improve reliability and precise landings.
SkyDroid APP – Video feed, Height, Distance, parameters, Map, calibration, and parameters
EX-1 6S Propulsion System
High capacity 6S LiPo Battery
40A Electronic Speed Controllers ‘ESC’
420KV high thrust motors
13” High quality carbon fibre propellers
Advanced Flight Modes
Follow me mode
Return to Land mode
Boat landing mode
GPS Waypoint mission planning
GPS positions saved
Multiple Safety Features
APP display and voice.Visual and voice messages are broadcast to keep the pilot informed about all aspects of the flight. The system will warn you by voice and display that the battery is low, geofence is breached or when Magnetic interference is detected
Self-protect Low Battery– The bait release is automatically deployed on Low battery
Self-protect Loss of signal – The bait release is automatically deployed on Loss of signal
Loss of Signal – Return to Land ‘RTL’ function is activated for loss of signal
Low Battery – Return to Land ‘RTL’ function is activated on low battery
Voltage Monitoring feature – The battery voltage is displayed on the App for easy battery level checking. In addition, the craft will not armstart motors if it detects the battery is not at a safe level for flight.
Anti-pendulum feature (POS.HOLD) mode has a more controlled de-acceleration to assist in limiting the degree to which a pendulum motion can occur with the bait. This allows for shorter leaders to be used with safety.
RTL speed– Return to Land ‘RTL’ speed has been increased to get the drone off the water as soon as possible
Landing detect– The new landing detect feature will shut motors off as soon as the drone detects a landing during auto land from RTL.
Distance and Altitude Geofence –The parameters are set at factory to 500 metres and a height of 40 metres. (Adjustable for advanced users) RTL can be set for Alt and Distance breach if required via the APP.
Thrust Loss Detection –The bait release is automatically deployed when thrust loss is detected
Magnetic interference monitoring – Auto adjustment and verbal warnings